LOCTITE ABLESTIK JM 7000 die attach adhesive has been
formulated for use in high throughput die attach applications. This
material has been used successfully on rigid substrates with die sizes
up to 700 mils.
LOCTITE ABLESTIK JM 7000 has been approved by DESC and
Rome Laboratory for military products.

TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity, HAAKE RV-20 Rotoviscometer, mPa·s (cP):
Cone 1o @ Shear rate 22 s
-1 9,000
Work Life @ 25°C, hours 8 to 16
Shelf Life @ -40°C (from date of manufacture), days 365
TYPICAL CURING PERFORMANCE
Cure Schedule
30 minutes @ 150°C
Suggested temperature cures are from 150 to 350oC. For
applications requiring higher electrical conductivity, a cure cycle of 15
minutes @ 300oC is recommended. Product properties will not be
reduced by subsequent post die attach thermal exposure, i.e.,
wirebond, and/or lid seal up to 370oC.

TYPICAL PERFORMANCE OF CURED MATERIAL
Die Shear Strength:
2 X 2 mm Si die, kg-f,
cured 20 minutes @ 150oC
Substrate DSS
Ag/Cu LF ≥5
Tensile Strength :
cured 30 minutes @ 300oC, MPa
After Cure After 1000 TC'C"
>17 >17
Radius of Curvature:
Si die on Alumina, meters
cured 30 minutes @ 300oC
Chip Size: ROC
15 x 15 mm > 5

• 

  漢高樂泰導電膠,楊浦厚膜漢高ABLESTIKJM7000導電膠

  面議

  產品名：漢高ABLESTIKJM7000導電膠,JM7000導電膠,漢高導電膠,樂泰導電膠

• 

  ablestik84-1A導電膠

  面議

  產品名：導電膠,耐高溫導電膠,84-1A導電膠,84-1LMI導電膠

• 

  呂梁樂泰SI5910密封膠硅基密封膠

  面議

  產品名：樂泰SI 5910 密封膠,硅基密封膠

• 

  寧河樂泰609固持膠

  面議

  產品名：樂泰 609 固持膠,金屬膠

• 

  隨州樂泰SI5970密封膠

  面議

  產品名：樂泰 SI5970 密封膠,硅酮密封劑

• 

  青浦樂泰SI5699密封膠法蘭密封膠

  面議

  產品名：樂泰 SI 5699 密封膠,法蘭密封膠

• 

  呼倫貝爾樂泰515密封膠

  面議

  產品名：樂泰515 密封膠,平面密封膠

• 

  鄭州樂泰542螺紋膠

  面議

  產品名：樂泰542 螺紋膠,螺紋密封膠